Product Description:
The LNK-POE-2P is a passive Power over Ethernet kit, consisting of a splitter and an injector. This kit allows you to make use of PoE applications with a highly convenient and cost-effective method. You don’t have to worry about where to find a power outlet when setting up your AP or IP camera. This kit uses the power adapter shipped with your network device and doesn’t require a dedicated PoE power adapter.
Features:
The Passive PoE Splitter + Passive PoE Injector is designed for easy installation for various PoE applications such as Access Points, Customer Premise Equipment (CPE), IP Cameras (IPCam) and IP Phones. This injector is equipped to accept power supply from powered devices up to 57V voltage input.
The Passive PoE Injector simplifies the installation of the connected powered device by eliminating the need to install a direct power supply in the cable. It accepts the input voltage from the powered device, and adapts it into the required voltage for the remote device. It reduces the wiring complexity of the PoE setup, thereby making it easier to install the powered device without involving complicated wiring.
The Passive PoE Splitter + Passive PoE Injector is the perfect solution for low power consuming devices such as wireless access points, IP Cameras and IP Phones. It provides reliable connection with minimal power losses, making it the ideal power solution for PoE applications.
Technical Parameters:
This product has an interface of data pins numbered 1, 2, 3, and 6, as well as power pins numbered 4, 5, 7, and 8 that have a range of voltage from 12 to 57 volts. It is made from PVC and is compatible with a T IA/EIA 568 Cat. 5 network cable, with an Ethernet data rate of 10/100 megabites per second, a RJ-45 Ethernet cable connector, an operating temperature of 0°C to 40°C (32°F to 104°F), a storage temperature of -40°C to 70°C (-40°F to 158°F), an operating humidity of 10% to 80% (non-condensing), a storage humidity of 5% to 90% (non-condensing), a product weight of 55 grams, and dimensions of 210 x 19 x 19 millimeters (L x W x H).
Applications:
Support and Services:
PoE Power Splitter Technical Support and Service
We offer technical support and service for our PoE Power Splitter product. Our support team has a wealth of experience and knowledge that can help you troubleshoot any issue that may arise. We understand the importance of having a reliable and efficient product and are here to ensure that you get the most out of your PoE Power Splitter.
We are available 24/7 to answer any questions you may have and provide technical support and assistance. Our customer service agents will be able to guide you through any difficulties that may arise. We can help troubleshoot any issues you may have with your PoE Power Splitter and provide advice on how to best use the product. If necessary, we can also provide replacement parts and accessories.
If you need help, please don't hesitate to contact us. We are here to help and provide you with the best possible service.
Packing and Shipping:
Packaging and Shipping
PoE Power Splitter is packaged in a cardboard box with the following dimensions:
- Length: 5 inches (12.7 cm)
- Width: 3.5 inches (8.9 cm)
- Height: 2 inches (5.1 cm)
The product is shipped via Express, Air, Sea with tracking information provided.
Ordering Information:
| Item | Description |
| LNK-POE-2P | Passive PoE Kit: Passive PoE Splitter + Passive PoE Injector |
